MEC8000 Vacuum Pump(Hydraulic)

Part number

MEC8000H

Unit

Each

Specifications

• Each pump is subjected to a final check in the factory, in which the vacuum, compression and lubrication are tested, among other factors
• A test report relating to the serial number is drawn up for each pump

Benefits

As B.P. pumps are tested, inspected and packaged with the utmost care, trouble-free start-up is 100% guaranteed

Application

These vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks

Properties

These pumps can generate both positive pressure and vacuum

Consists of

• These pumps are supplied with standard vanes. Long-life vanes available on request
• Without pressure relief valve and vacuum valve
• The pumps are delivered without lubrication oil (item BP5070)
• Including hydraulic base for mounting the hydraulic motor
• Without hydraulic motor and key bush

Technical information

• Composition of the part numbers: MEC = series, 8000 = type, H = hydraulic drive
• On pumps without automatic lubrication (no "A" in the item number), the pump is equipped with a forced lubrication system that is adjusted using dripper nozzles Automatic lubrication available on request
• On pumps without automatic lubrication, the quantity of lubrication oil is set in the factory and cannot be changed without a tool
• In the case of forced lubrication, as with automatic lubrication, the function must be checked at all times during operation
• Hydraulically driven pumps rotate clockwise. Anti-clockwise rotation available on request
• The direction of rotation is determined when the axle to be driven is aligned with the observer
• Oil to be used for lubricating the vanes: genuine oil from B. P. (item number BP5070)

Hydraulic motor connection

3.5

Bore diameter

15 mm

Connection safety valve

1 1/2 Inch

Distance 2nd bore to end

196 mm

IDistance bore width

227 mm

Distance center shaft to left side

195 mm

Distance center shaft to right side

215 mm

Distance end of shaft to mid first bore

287 mm

Distance flange to mid first bore

279 mm

Distance holes

252 mm

Distance underside to center shaft

164 mm

Height

597 mm

Connection

80 mm

Hydraulic motor capacity

63.5 l/min

Length

735 mm

Flow max.

8100 l/min

Pressure max.

1.5 BAR

Rotation max.

1400 r/min

Power requirement by max. pressure

22 kW

Power requirement by max. vacuum

15 kW

Pump capacity

486 m³/h

Vacuum max.

0.9 BAR

Weight

153 kg

Width

410 mm